Geograph - photograph every grid square

Here's a quick link to the Ordnance Survey's beginner's guide to grid references: https://www.ordnancesurvey.co.uk/getoutside/guides/beginners-guide-to-grid-references/

Grid references locate places on the map. They consist of one (Ireland) or two (Great Britain) letters followed by an even number of digits. The letters define a (100x100)km^2 square (a 'myriad' in Geograph-speak) and are best looked up on an overview map. The numbers locate the position within that square. To find a location, split the block of numbers in two. The first block is the easting, i.e. the distance from the western edge of the myriad. The second is the northing - the distance from its southern edge.

Grid references always specify square areas, not points. The more digits there are, the smaller is the square referred to, and the higher is the precision of the grid reference. For each pair of digits, the precision increases by a factor of ten: SN58 defines a square of (10x10)km^2, 50km to the east and 80km to the north of the origin of myriad SN. SN5881 is a (1x1)km^2 square 58km east and 81km north of that origin. SN 58272 81324 is a (1x1)m^2 area. When stating a grid reference, the precision given should be in line with the accuracy of the position (how well do we actually know where we are?) and with the size of the object (a building doesn't fit on a 1m^2 footprint).

The system Geograph still uses in Ireland works in exactly the same way, although the Ordnance Surveys of Ireland and of Northern Ireland have recently introduced a different system for their maps. This article http://www.geograph.org.uk/article/Locating-photos---Republic-of-Ireland explains the differences.

Every submitted image has an Ordnance Survey grid reference, which pins it down to a single 1km square in Britain (two letters) or Ireland (one letter). That generates a local map above the photo with a blue ring where the main feature is.

The viewer location can be any distance away but if not a cross grid will always be within the same square. Cross grids include views, longer telephoto shots and normal photos taken near a square border.

When adding your own decide where the primary location is in the view and then use the second black circle to show where you were when you took it.

Running this site costs money, particularly over time as the storage requirements are quite large. Whilst those costs were initially met by generous sponsorship from the Ordnance Survey, more recently the site has been dependent upon donations. Granting commercial use allows anyone who runs the archive in the distant future to explore other options for generating funds, such as sales of montage posters.

Granting everyone those same rights actually protects the site community from exploitation), but do bear in mind that we only retain a screen-quality version of your image, and that under the terms of the Creative Commons Licence, you must be credited for any use of your image.

http://www.geograph.org.uk/help/freedom

It depends on which kind of points you're chasing. If it's good old first-geograph points you're after, the answer is probably 'Ireland', although a handful are still left on the big island too. Many of them are mudflats and military installations, though, so good planning and potentially letter writing for permission may be involved. First-geograph points are available in squares shown in green or orange on this map http://www.geograph.org.uk/mapbrowse.php - zoom into your region of interest. Occasionally, squares that have become 'green' again because a mislocated photo was moved are announced on the forum at http://www.geograph.org.uk/discuss/index.php?&action=vthread&forum=2&topic=8428&page=0 . Expect an imminent mass pilgrimage of Geograph-ers to these, though!

There are also other points that you might like to collect. Personal points are awarded for _your_ first geograph for a square. This map http://www.geograph.org.uk/mapbrowse.php?mine helps you find your personal green squares.

If you are the 2nd, 3rd or 4th visitor to a square and submit a geograph for it, you also get a repeat-visitor point for that. The best way to find which squares have had few visitors is the draggable map http://www.geograph.org.uk/mapper/ . You need to change the data overlaid on the Ordnance Survey map by clicking the blue '+' sign top right. Then select 'contributor depth'. This shows the number of different contributors to each square, so if it shows a '2', then you can get a 3rd-visitor point if you upload a picture for that square.

Finally, there are TPoints. They are awarded for geographs which were taken at least five years earlier and later than any existing ones, so you can get a TPoint for a current geograph if nobody has uploaded one taken in the last five years before you. If you enable the TPoint layer in the draggable map (again, via the blue '+'), you can see to which squares this currently applies. You can also get a TPoint for an archive shot which falls outside the periods five years either side of any previously uploaded geographs, but the map doesn't show this.

Most GPS receivers allow you to change the datum and display format to OSGB36 and British National Grid, the convention used by the Ordnance Survey of Great Britain. If you're using a GPS built into a mobile phone, this may not be possible, and your coordinates will always be in WGS84 lat/lon format. If you also use your GPS phone to take your geographs, it should store the positions in the GeoExif header, which Geograph should interpret correctly as camera position (via the Geotagged Image option).

Otherwise, you can use the map part of the submission routine ('locate/find on map') and enter your lat/lon coordinates in the format the 'Search' function, in decimal degrees like 56.45657,-4.54675 . This will look up the grid reference for the location and insert it as _subject_ position into the submission dialogue. You may have to adjust this unless the subject was right in front of you.

Alternatively, there is a conversion tool here on Geograph Tools http://www.nearby.org.uk/coord.cgi?f=conv from which you can copy and paste. Or one built into geograph at https://www.geograph.org.uk/latlong.php

(Question asked by Roga and answered by barryhunter, oasthouse and DHL on the forum http://www.geograph.org.uk/discuss/index.php?&action=vthread&forum=18&topic=13483&dontcount=1&page=0#1
Later updated, as conversion tools have changed over time))