2008

NY1930 : Benchmark, Bassenthwaite Lake Station House

taken 16 years ago, near to Dubwath, Cumbria, England

Benchmark, Bassenthwaite Lake Station House
Benchmark, Bassenthwaite Lake Station House
Detail of the Ordnance Survey flush bracket benchmark on Bassenthwaite Lake Station House. The flush bracket, benchmark number S8026, faces south south west and marks a height of 73.462m above mean sea level (Ordnance Datum Newlyn), last levelled and verified in 1968.
This benchmark is shown with an incorrect grid reference on the Ordnance Survey database.
Bench Mark

Bench marks LinkExternal link were historically used to record the height above sea level of a location as surveyed against the Mean Sea Level data (taken at Clarendon Dock, Belfast, for Northern Ireland data, Newlyn in Cornwall for data in Great Britain and Portmoor Pier, Malin Head, for data relating to the Republic of Ireland). They were used as part of a greater surveying network by the UK Ordnance Survey, Ordnance Survey Northern Ireland (OSNI) and the Ordnance Survey Ireland (OSI). If the exact height of one bench mark is known then the exact height of the next can be found by measuring the difference in heights, through a process of spirit levelling. In this way hundreds of thousands of bench marks were sited all around the UK & Ireland from the mid 19th to late 20th centuries. There are several distinct types of bench mark:

- Fundamental bench marks have been constructed at selected sites where foundations can be set on stable strata such as bedrock. Each FBM consists of a buried chamber with a brass bolt set in the top of a granite pillar. See NG8825 : Dornie fundamental bench mark for an example. FBMs were used in Ireland as well as GB but those in Ireland do not have any surface markers, nor are they marked on standard maps.
- Flush brackets consist of metal plates about 90 mm wide and 175 mm long. Each bracket has a unique serial number. They are most commonly found on most Triangulation Pillars, some churches or on other important civic buildings. See J3270 : Flush Bracket, Belfast for an example.
- Cut bench marks are the commonest form of mark. They consist of a horizontal bar cut into a wall or brickwork and are found just about anywhere. A broad arrow is cut immediately below the centre of the horizontal bar. See J3372 : Bench Mark, Belfast for an example. The horizontal mark may be replaced by or contain a bolt - see J1486 : Bench Mark, Antrim.
Other marks include:
- Projecting bench marks such as SD8072 : Projecting Bracket Benchmark on St Oswald's Tower
- Bolt bench marks such as SJ1888 : OSBM bolt on Hilbre Island
- Rivet bench marks such as J3978 : Bench Mark, Holywood
- Pivot bench marks such as SJ2661 : Pivot bench mark on Leeswood Bridge

Bench marks are commonly found on older buildings or other semi-permanent features such as stone bridges or walls. Due to updated mapping techniques and technological advances such as GPS, bench marks are no longer maintained. Many are still in existence and the markers will probably remain until they are eventually destroyed by redevelopment or erosion.


Creative Commons Licence [Some Rights Reserved]   © Copyright Adrian Taylor and licensed for reuse under this Creative Commons Licence.
This photo is linked from: Automatic Clusters: · Bassenthwaite Lake Station [5] · Bassenthwaite Lake Station House [2] ·
1:50,000 Modern Day Landranger(TM) Map © Crown Copyright
+
1:50,000 Modern Day Landranger(TM) Map © Crown Copyright
TIP: Click the map for more Large scale mapping
Grid Square
NY1930, 49 images   (more nearby 🔍)
Photographer
Adrian Taylor   (more nearby)
Date Taken
Saturday, 19 April, 2008   (more nearby)
Submitted
Saturday, 8 October, 2022
Subject Location
OSGB36: geotagged! NY 19867 30991 [1m precision]
WGS84: 54:40.0559N 3:14.6375W
Camera Location
OSGB36: geotagged! NY 19867 30991
View Direction
North-northeast (about 22 degrees)
Clickable map
+
NW N NE
W Go E
SW S SE
Image Type (about): close look 
This page has been viewed about 41 times
You are not logged in login | register